Royal Alloy & Scomadi Servicing · Book Now

Royal Alloy & Scomadi 200
Full Service

Complete CVT servicing with genuine parts, professionally done. Add Malossi performance upgrades while we have your scooter open.

Full Servicing Package

Main Package

Royal Alloy 200 & Scomadi 200 Full Service ✓ Labor Included

Drop off your Royal Alloy or Scomadi — we handle the complete CVT service and hand it back running fresh.

Malossi belt included
Malossi rollers included
ENI engine oil 10W-40 included
Oil filter included
CVT cleaning & greasing included
Professional installation included
Package Price Nett $280.00

Optional Performance Upgrades

Take it further with genuine Malossi performance parts, fitted at the same time. Tap to add.

Multivar 2000 Variator
5111885

Multivar 2000 Variator

A full sport variator kit — variator, rollers, contrast spring and spacer included. Sharpens throttle response and smooths the whole power curve for quicker take-offs and a stronger mid-range.

Maxi Delta Clutch
5211821

Maxi Delta Clutch

Adjustable automatic clutch for the original Ø134 bell. Bites harder and holds longer with adjustable engagement RPM — crisp, predictable drive off the line.

Ventilvar Half-Pulley
6120017B

Ventilvar Half-Pulley

Fixed half-pulley with an optimised, hardened belt surface. Extends the gearing range and keeps the belt running true under load for sustained high speed.

Red Filter E18 Ø55/60
0420126

Red Filter E18 Ø55/60

High-flow conical air filter with a 45° connector and clamp. Frees up intake breathing for better throttle response and a sportier intake note.

O2 Controller — Lambda Emulator
5519817B

O2 Controller — Lambda Emulator

Optimises the fuel mixture by managing the lambda signal — smoother running, better response and the right air-fuel ratio once you start adding performance parts.

Force Master 2.1 Controller
5519720

Force Master 2.1 Controller

A full programmable fuel controller for serious engine builds — fine-tunes fuelling across the rev range for maximum performance. Note: must be installed together with the Malossi big-bore cylinder (art. 3115326). For full engine builds only — contact Mark Yeow for full information. Please take note that cylinder kits are strictly for OFF-ROAD USE.

MALOSSI TORQUE DRIVER
6112563

MALOSSI TORQUE DRIVER

A complete driven-pulley transmission set that replaces the stock torque driver — straight-angled slots let the engine rev higher, faster, transmitting full power to the rear wheel with no acceleration lag.

Want just one piece? Add any part individually on top of your full service. Tap to add.

⭐ Top Pick
Malossi Multivar 2000 Variator (5111885) Full replacement variator for 200–300 cc four-stroke liquid-cooled engines. Reprofiled ramps and a wider ratio spread give sharper acceleration off the line and more top end, and it runs on Malossi HTRoll rollers so the shift behaviour stays consistent as the mileage builds.Part no. 5111885 · Brand: Malossi · Fitment confirmed by Scooter Narcotics before installation. + $313.09
Malossi Maxi Delta Clutch Ø134 (5211821) Sport clutch with a 134 mm bell diameter, for tuned 125–310 cc four-stroke engines. Reworked shoe geometry and stiffer springs bring the engagement point up and hold it there, so more of the engine's power reaches the rear wheel instead of being lost to slip. Pairs naturally with a Multivar variator and a torque driver.Part no. 5211821 · Brand: Malossi · Fitment confirmed by Scooter Narcotics before installation. + $312.87
Malossi Torque Driver Code 6112563 + $584.04
Malossi Ventilvar Half-Pulley — Italjet Dragster 200 The Malossi Ventilvar 2000 half-pulley (Ø 122 mm) is a direct performance upgrade for the Italjet Dragster 125/200. This variable-speed half-pulley sharpens throttle response and improves drive on the 4T LC engine.Compatible with: ITALJET Dragster 125/200 (´21-) Euro5, 4T LC.Part no. 6120017 · Brand: Malossi. + $125.12
Red Filter E18 Ø55/60 · Code 0420126 + $168.22
Malossi O2 Controller (5519817B) Lambda emulator for 125–300 cc fuel-injected four-stroke engines. Once the intake, variator or exhaust has been changed, the standard ECU keeps trimming the mixture back towards the factory map — this module corrects the oxygen sensor signal so the fuelling stays where the tune needs it. Plug-in fitment, nothing cut.Part no. 5519817B · Brand: Malossi · Fitment confirmed by Scooter Narcotics before installation. + $345.38
Nology Hot Wire HT lead · Made in USA + $306.63
⭐ Top Pick
Torsion Spring 1500 RPM Malossi · highly recommended + $45
Malossi Force Master 2.1 — Italjet Dragster 200 The Malossi Force Master 2.1 (5519720) is a plug-and-play fuel injection control unit that remaps the fuelling on the Italjet Dragster 200. Designed to pair with Malossi tuning kits, it optimises the air/fuel mixture for stronger, cleaner performance across the rev range.Compatible with: ITALJET Dragster 200 4T LC Euro 5.Part no. 5519720 · Brand: Malossi. + $910.69
Your TotalNett price — all-in SGD 72

Schedule Servicing

🔥
High Demand — Limited Slots Available Due to overwhelming orders, the dates shown are the fastest available for servicing. Secure your slot early.

Mon
Tue
Wed
Thu
Fri
Sat
Sun

Slot confirmed:
Selected
Unavailable
Public holiday — named on the date
Sunday / too soon / fully booked

Scooter Narcotics Pte Ltd

UEN202101197N
Address60 Jalan Lam Huat #04-28, Singapore 737869

Servicing will be carried out at the address above. Please bring your scooter on your scheduled date.

Reserve Your Slot

No account needed · pay securely at checkout to lock in your slot · we'll confirm your appointment by WhatsApp or email
All prices are nett.

You're on the list.

Your appointment and selected package have been added to your cart.